50mm XC DBB Valve
The XC Double Block and Bleed valve is based on standard Ball, Needle, Ball configuration with a 1/2″ NPT screwed vent (plugged). Available from 2″ to 3″ in size and pressure class from 150lbs to class 2500lbs available in 3 standard materials.
OPTIONAL FEATURES
Fire Safe Design
UNI Directional Flow
Bi Directional Flow
Servicing Kits
Severe Temp Rating
NACE Approved
Specifications & Ratings
The XC DBB Valves offers a ball, needle, ball configuration based on soft seated PEEK design, AED O rings as the primary seal and a graphite seal for the fire safe integrity. The XC range is available from 2" to 3" up to class 2500lbs in 3 materials. Carbon Steel LF2, 316 Stainless Steel and Duplex. The range is ISO 15848 Part 1 qualified, PR-2 qualified and endurance tested to over 1200 cycles. The range is full qualified to ISO 10497/API 607
Valve Types
Double block and bleed
Pressure Rating
Class 150 - 2500 (API Optional)
Temperature Rating
-46°C up to 200°C
Bore Size
50MM
Connection Size
2" -3"
Inlets
- Raised Face
- Flat Face
- Ring Type Joint
Outlets
Flanged / Threaded / Butt Weld/Socket Weld
Handles
Lever Isolates and T bar vent.
Material Options
Materials include Carbon Steel, Stainless Steel and Duplex Other exotic materials available upon request.
Material Construction
- Stainless Steel 316
- Duplex
- Carbon Steel. Other Materials can be made available upon request
Trim Material
- All trim materials are a standard UNS S31803 (22% Duplex). Other materials available on request
Bolting Materials
- L7M
- B8M. Coatings available on request
Material Traceability
Yes
Testing & Design Standards
All Alco Valves Group products are designed to comply with or exceed internationally recognised products. API 598 approved tested.
Testing Standards
- API 598
- API 6A
- ISO 5208
Design Specifications
B16.34 or API 6A
Fire Safe Standards
- ISO 10497
- API 607
Relevant Approvals
Customer specifications can be adhered to.